ISDN DEFINITY
Extender 2300EU/2100EU
29
2100EU Terminal Information
Introduction
The following section is only to be referred to if you
have the ISDN DEFINITY
Extender 2100EU with
Terminal Adapter capabilities.
Description
The ISDN DEFINITY
Extender 2100EU is capable of
using the second ISDN B Channel for Windows Dial-up
Networking to establish a connection directly to a Remote
Access Server.
Typical
Connections
Connect an RS232 serial cable to the DB9 female
connector on the Remote Module labeled RS232 and
connect the other end to the Remote PC.
If you are going to connect the Switch Module to a
Windows NT Remote Access Server, an RS232 cable
should be connected from the connector labeled RS232
on the Switch Module to a COM port (also could be on a
COM port off a Digi
port) on the Remote Access
Server.
If you are going to be dialing directly into a Remote
Access Server, connections are not required to the Switch
Module, but your Information Services Department
should be consulted on setting up a Dial-up Network
connection on the remote PC.
