Tech Help Line
UK -
0845 194 7584
Non UK -
+44 (0)1952 238 100
Visit our website at
Luceco is a registered trade mark of Nexus Industries Ltd.
Supplied by
BG Electrical Ltd
Stafford Park 1 TF3 3BD ENGLAND
www.luceco.co
LED IP65 Mosi Bulkhead
PART CODE: LBM290W11S40, LBM290B11S40,
LBM200W6S40, LBM200B6S40
Installation & Operating Instructions
SPECIFICATIONS
•
Suitable for use with Mains voltage of 220-240V AC
•
This product must be disconnected before insulation
resistance testing of the lighting circuit
•
Check for electrical cables and pipes before installation
NOTE
– To comply with regulations, installation must be carried
out by qualified electrician and in accordance with the current IEE
Wiring Regulations (BS7671) and Building Regulations.
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/ISOLATED
BEFORE COMMENCING INSTALLATION
•
To maintain the IP65 rating of the bulkhead, a suitable 20mm
cable gland should be used in conjunction with rubber
insulated cable to ensure the supply cable is sealed in the
gland. Failure to use a gland and/or rubber insulated cable
may result in water ingress
Page 1
SUGGESTED METHOD OF INSTALLATION
The bulkhead is designed for mounting in any of the
following options: –
• Surface Wall Mounting
• Surface Ceiling Mounting
1. Surface mounted options may use rear cable entry for flush
mounting or there is facility for surface Conduit ‘besa’ box
mounting or side conduit entry. (Image 1)
2. With the method of mounting chosen, remove the front
Diffuser, by undoing the three front Screws. (Image 2)
3. To remove LED tray, loosen two retaining screws,
and twist tray clockwise and remove. (Image 3)
4. This Bulkhead can be mounted on ceilings and vertical walls.
Ensure the mounting surface is suitable for installation. Once
mounting points are decided, drill out mounting holes and any
cable entry points needed.
5. Cable Entry Points must be drilled out with a 20mm bit, cleaned of
any loose burrs and fitted with a suitable IP65 gland, if the IP65 rating
is to be maintained. Otherwise the IP rating would be reduced.
4
1
cable entry
points
cable entry
points
2
loosen
screws here
3
loosen
screws here
CRI
80
>
IP65
RATED
3
GUARANTEE
year
650
LUMINAIRE
LUMENS
Code
Rated Voltage
Power
Current
PF
Lumens with
no diffuser
Lumens with
diffuser
LBM20X6S40
200-240V
9W
45mA
>0.8
850 Llm
650 Llm
LBM29X11S40
200-240V
14W
67mA
>0.8
1400 Llm
1100 Llm
TECHNICAL INFORMATION
THIS LUMINARE CONTAINS NO USER REPLACEABLE COMPONENTS.
