Tech Help Line
UK -
0330 024 9279
Non UK -
+44 (0)1952 238 100
INSTRUCTIONS FOR NEW INSTALLATIONS
1. Turn OFF power supply, ensure all required equipment and
tools are present.
2. The floodlight is intended for exterior use
and is IP65 rated. Select a suitable mounting
position. Recommended mounting heights as follows,
area illuminated is typically mounting height x3.
3. With a suitable mounting position identified, securely fix the
U shape mounting bracket to the mounting surface.
Mounting brackets
Visit our website at
Luceco is a registered trade mark of Nexus Industries Ltd.
Supplied by
LUCECO
Stafford Park 1 TF3 3BD ENGLAND
www.luceco.uk
GUARDIAN SLIMLINE
LED Floodlights - with PIR
LFSPV1MB03.16
3
GUARANTEE
year
standard
30,000
HOURS
CRI
80
>
IP65
RATED
IP44
RATED
Floodlight
PIR
Note - This product range is designed for domestic outdoor use.
Not suitable for interior or commercial use.
Note - If outdoor connection is required, use a suitably
IP Rated junction box.
4. The floodlight is supplied pre-wired with 1.0M of H05RN-F
cable, removing the need to open the housing.
5. Connect the pre-wired cable to the electricity supply,
observing the correct polarity.
LIVE = BROWN
EARTH = GREEN/YELLOW
NEUTRAL = BLUE
6. PIR Adjustments
The PIR sensor detects upto 10 metres across a
120° beam angle.
To aim, it can be rotated and tilted.
PIR can be adjusted for the following
• Time Dial = duration the floodlight stays on once movement
is detected and Lux Level is met, from 10 seconds to upto
8 minutes.
• Lux Dial = controls when the PIR will detect movement.
Ambient light level must be below the set level, for PIR to
operate and detect movement. Adjustable from 2 Lux to
2000 Lux.
Guardian Slimline LED Floodight - PIR
7. Once the PIR has been initially set, check all fixings and
electrical connections and when safe, reinstate the power.
Note - During the first 48 hours of operation, the PIR may
cause the LED floodlight to operate as it self adjusts to the
ambient light level of the installation.
PART CODE:
LFSP10W1B30 / LFSP10W1B50 /
LFSP20W1B30 / LFSP20W1B50 / LFSP30W1B30 /
LFSP30W1B50 / LFSP50W1B30 / LFSP50W1B50
For pole or post top
mounting:
Ensure longer bracket
(fitted) is used
For wall mounting:
Use shorter bracket
provided
Wattage
Height
Suggested Halogen Equivalent
10
2.0m - 3.0m
100W
20
2.5m - 4.0m
200W
30
3.0m - 5.0m
300W
50
4.0m - 6.0m
500W
FIXING HERE
FIXING
HERE
TIME
LUX
MIN
MAX
MIN
Installation & Operating Instructions
NOTE – To comply with regulations, Installation must be carried out by suitably
qualified competent person and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions must
be left for the user/Maintenance engineer for future reference.
For Non-UK, Please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION