Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 7 / 2 0 2 1 )
IZZY LED CLAMP LAMP
SKU# 259991, 259992, 259993, 259994
Rated Voltage 220-240V~ 50/60Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of the product. Please keep the instructions for future reference.
Warranty
•
This luminaire is covered by a 3-year warranty from the date of purchase. Please retain the proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification of the product.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
Select a suitable location for this luminaire:
- The clamp is for mounting on a surface with the appropriate thickness (Min.10mm – Max.30mm).
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the luminaire.
- Ensure the luminaire is not installed in the direct line of an air vent/system.
- If installing the luminaire in an area prone to moisture, ensure that the area is well ventilated and an
appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product
fault, and as such is not covered under warranty.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the portable lamp is fully
assembled and ready to use for the first time.
Installation Directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within
the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
1. Select a suitable location for clamping the light luminaire.
NOTE: The clamp is for mounting on a surface with the appropriate thickness (Min.10mm – Max.30mm).
2. Insert the USB cable into the power adaptor/device.
NOTE:
Please ensure an appropriate power adaptor/device is used according to the rated input (5V DC, 1A) of this
product.
3. Use the cord-line switch to turn the light On/Off.
4. Adjust the light head according to your need.
NOTE:
When adjusting the angle of the head, do not rotate more than 180° as this may damage the internal wires.
When adjusting the height of the head, do not adjust more than 90° as this may damage the internal wires.
