Installation Instructions
1 |
P a g e
v 1 . 2 ( 0 1 / 2 0 2 2 )
GLOW LED CANDLES (3 PACK)
SKU# 269295, 269296
Rated Voltage 3.0V
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.
Warranty
•
This product is covered by a 12-month warranty valid for in-store replacement or refund only.
•
The warranty period starts from the date of purchase. Please retain the proof of purchase for any warranty enquires.
•
Warranty will be void if there is any damage due to improper usage or modification to the product.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
•
Candle Battery:
Total of 6x 1.5V AA battery (not included). 2x 1.5V AA battery (not included) for each candle.
•
Remote Battery:
CR2025 button battery (included)
•
Select a suitable location for this product:
-
This product is not waterproof.
-
This product is suitable for indoor use only.
-
Keep away from liquids, dusty, humid or hot areas.
-
Keep out of direct sunlight. These LED candles are made from wax and they can melt if placed in sunlight for
prolonged periods of time.
•
Lay out all the components on a smooth surface and make sure there are no components missing.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the product has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Battery Installation/Replacement
CANDLE BATTERY
- Total: 6x AA batteries (not included)
1.
At the base of the candle, pull the tab and lift out the battery box lid (A) from the battery box (C).
2.
Install 2x AA batteries (B – not included) into the battery box (C). Ensure the batteries are inserted with the
correct polarity.
3.
Install the battery box lid (A) back over the battery box (C) and ensure it is secure.
