Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 6 / 2 0 2 0 )
Lucci Connect Smart Motion Sensor
SKU# 299042
Rated Voltage 3.0V DC
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.
Warranty
•
This device is covered by a 2-year warranty from the date of purchase. Please retain the proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the device.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
•
Battery:
1 x 3V CR2450 button battery (included).
•
Select a suitable location for this device:
- This device is not waterproof.
- This device is suitable for indoor or dry location use only.
- Keep away from liquids, dusty, humid, direct sunlight or hot areas.
•
Lay out all the components on a smooth surface and make sure no components are missing.
If parts are missing, return the complete device to the place of purchase for inspection or replacement.
•
Check whether the device has been damaged during transport. Do not operate/install any device which appears
damaged in any way. Return the complete device to the place of purchase for inspection, repair or replacement.
Operation Directions
Battery installation & replacement
1. Unscrew and open the battery compartment lid.
Install CR2450 battery into the battery box. Ensure
the batteries are inserted with the correct polarity.
NOTE: CR2450 battery is included and make sure the
insulation film is removed for the first time to use.
2.
Install the battery compartment lid back then tighten the
screw.
Check and ensure the screw is tightened and
the lid is secure.
Installation & Operation
1. Use the provided 3M tape to stick the device on the
desired location.
NOTE: Ensure the surface is smooth, dry and clean
before applying the ‘3M’ adhesive tape.
2. Set up the wireless & in-app control according to the
‘Lucci CONNECT user guide’.
NOTE: Turn on the Bluetooth function of your mobile
phone before setting up.
NOTE: MUST BE used with Lucci gateway (SKU#
299075, sold separately) to receive notification &
control other ‘Lucci CONNECT’ products.
