!Caution:
If the problem is still not resolved, try the following operations:
Turn off the power switch at the bottom of main body and restart the
machine.
If the problem still exists, send the machine to the after-sale service center.
Common Fault
Table of warning codes
In case of common faults of machine, determine the causes based on the
following phenomenons and solve the problems as shown in the table
below.
Overload and failure of left driving wheel
Check the left wheel
Check the right wheel
Turn on the power switch
at the bottom
Check the left side brush
Check the right side brush
Check the fan
Power less than 20%
Put the machine back to
charging base or directly
charge it (see Items A
and B at Point 3 of Start
Guide on Page 8 )
Put the main body back
on the ground
Overload and failure of right driving wheel
Overload and failure of left side brush wheel
Overload and failure of right side brush wheel
Power switch at the bottom is off in the
charging
Garbage box is full of dust or suction
channel is clogged
Fan overload, or no fan sound or significantly
reduced sound
Clear the garbage box
and clean up the suction
channel
Collision switch is abnormal and the
machine keeps colliding against an obstacle
or reversing
Check the front bumper
for sensitivity and foreign
matter
Put the main body back
on the ground
Ground checking is abnormal, and the
machine stops working with the buzzing
sound
Left and right driving wheels are suspended
in the air and stop working with the
continuous buzzing sounds
1.
2.
17
