background image

Maintenance

1. Cleaning of left and right brushes

Wash the dirty side brush with water and dry it before use, and if the side 

brush is damaged, replace it with the new one.

!Caution:

When replacing the side brush, align both “L” and “R” marks on the side 

brush with those at the bottom of machine.

Cleaning of garbage box and strainer as below

Open the rotary cover at the “       ” indication.

After taking out the garbage box, check the suction channel of main 

body for foreign matters and clean it.

Remove the efficient strainer.

Remove the primary strainer.

Lower the garbage box to pour the dust.

Thoroughly clean the garbage box, primary strainer and efficient 

strainer. It is recommended to clean the efficient strainer once 15-30 

days. The service life of efficient strainer is up to 24 months. Do not 

brush it, and just blow it clean with dryer or tap it lightly to cause the dust 

to fall.

Be sure to install both strainers properly before use to avoid damage to 

the machine.

After above cleaning is completed, clean the garbage box and suction 

channel.

Dry the washed parts in the air and do not expose them to the sunlight. 

Install the parts into the machine after they are fully dried so as not to 

affect the functions and service life of machine.

Clean the left and right sensors in the suction channel with cleaning tool 

or soft cloth as shown below.

2.

A

B.

C.

A.

B.

C.

D.

E.

F.

!Caution:

G.

Open it from this place

15

Содержание HI3






















Отзывы: