9.3 Filling liquid cooler with fluid
Figure 42: Walkable areas of AlfaSolar SM/SRM
™
and SD
™
units
= Walkable area
SRD
™
models
Walkable areas of the SRD
™
models are not limited on the deck plate. Note the slippery edges.
You can use the liquid cooler top cover plates as a service desk. Alfa LU-VE recommends installing handrails
and using safety harness. Solutions for handrails and mounting legs are available from Alfa LU-VE.
9.3 Filling liquid cooler with fluid
WARNING:
Follow the recommendation of the working fluid supplier (Material Safety Data Sheet)
strictly.
Prevent the accidental release of fluid and adopt the visual and acoustic alarms to
minimize the consequences of insufficient amount of fluid. Plan the installation field
for recovering or disposing of the fluid.
To fill the liquid cooler:
1.
Mix the fluid well before use.
©
Alfa LU-VE, Rev-04
73
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
