6.4 Turning and lifting unit
WARNING:
To avoid the falling of a wooden box (optional for Solar SR
™
):
• Stack max 3 units on top of the other.
• Place the packages in line.
Always store the packages on a level surface.
See
Figure 10: Wooden box available only for AlfaSolar SR
on page 32.
6.4 Turning and lifting unit
Note:
Contact the manufacturer for further information on turning and lifting the forced draught fans
(FD).
WARNING:
Before lifting the unit, check its weight from the transport documents or from
the product nameplate and make sure that the lifting device, crane or truck is
appropriate.
1.
Only use lifting equipment that is equipped with appropriate labels.
2.
Ensure that the belts or slings with hooks used for lifting keep the equipment
balanced.
3.
Do not lift the unit with a crane before removing the pallet from under the unit.
Do not stand under the unit when it is hanging.
Caution:
Air cooled heat exchangers are fragile products, which makes them extremely sensitive
to incorrect handling during transport and positioning. Comply with the given instructions strictly to
prevent the heat exchanger from being damaged during the lifting procedure.
Only qualified personnel using approved lifting equipment is allowed to carry out lifting operations.
When lifting the unit, use all lifting points in the direction of lifting. Do not mix the lifting points of
vertical and horizontal position.
©
Alfa LU-VE, Rev-04
33
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
