6.1 Lifting package
6 Transport and storage
6.1 Lifting package
WARNING:
Lift and transport the units packed in an upright position very carefully.
Handle high units very carefully. Never place them on an inclined or uneven plane.
Danger of falling.
Before lifting the unit, check the weight on the nameplate. Verify that the lifting supports at least the unit weight
+10 %, when using a forklift. Only lift from the middle of the unit at the center of gravity supported by the
pallet. For safe lifting, the forks must be longer than 2.5 m and fully inserted under the unit. Position the forks
to the maximum width over the area supported by the pallet. Only lift an empty unit.
Figure 5: Correct lifting of AlfaSolar S/SR
™
units with forklift
Before starting lifting, make sure that
The manual is attached.
You have noted all transport and lifting signs and instructions from the unit and packaging.
You have made necessary advance control.
You have checked the lifting device and it is functioning properly.
The driver has the permission for lifting.
©
Alfa LU-VE, Rev-04
25
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
