5.3 Identification of product
Wind load
40 m/s (installed unit)
Earthquake
0.2 g
Altitude
<100 M.A.S.L.
Minimum ambient air temperature
-40 °C (standard unit)
Note:
See project-specific documentation for technical data, product designation, performance data,
lifting/fixing points of fan motors, weights, internal volumes, and position of connections.
5.3 Identification of product
Check the identification data on the product nameplate. The nameplate is located at the same end of the unit
as the inlet connections. The product nameplate includes contact information of the manufacturer, product
designation, number of order acknowledgement, technical data of the fan motor, operating/test pressure, min/
max operating temperature, internal volume, weight, month/year of manufacture and (if required) CE or EAC
marking. CE marking is available for SR
™
models on request.
Product labels
Table 1: Product labels
Centre of gravity
When lifting the unit with a forklift, always place the forks under
the centre of gravity.
Product nameplate
Model
on page 18
O.A.
Order Acknowledgement number
Serial no: Ref
Communicate these when ordering spare
parts as they identify the unit
Unit net weight
Check weight before any lifting operation to
ensure that proper lifting tools are used
Coil data
Material
Tube material
Volume
Internal volume
Fluid group
According to PED
max DN
Maximum diameter of the distributor tube
Coil TS
Range of operating temperatures for the
coil
PS
Design pressure
PT
Test pressure
©
Alfa LU-VE, Rev-04
20
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
