LU-VE ALFA ptigo PF27MC, Инструкция по эксплуатации

Страница: 11 / 24

31573808EN-02
11
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
Model n. of fans
Dimensions (mm)
A B
PF27MC 1 678 412
PF27MC 2 1048 782
PF27MC 3 1418 1152
PF27MC 4 1788 1522
6 Installation
6.1 Mounting dimensions
3/4'' GAS
20
10
363
415
B
A
Coolers must be hung such that the coolers can contract and expand somewhat. Cooler contraction
occurs during refrigeration operation, and cooler expansion occurs during defrost. For air coolers
with copper tubing this figure runs up to 1.65 mm per meter cooler length. All heat exchangers must
be set up level.
Do not install in a location:
• too close to heat sources.
• that may increase the vibration of the unit.
• that cannot support the weight of the unit.
• subject to risk of exposure to combustible gas.
• exposed to oils and vapours.
• with unusual environmental conditions.
Choose a location:
• where the noise and exhaust air are within the limits permitted by applicable standards and
regulations.
• protected from headwinds.
• with the required space.
• that will not block passageways or doors.
• with a floor structure that is strong enough to support the weight of the
unit and minimize vibration transmission.
Weight information are listed on the product label and/or in the relevant
product documentation.
Detailed drawings showing all required mounting and refrigerant connection
dimensions are available available for download on alfa.luvegroup.com .
Dimensional drawings
298
15
33
330