LU-VE ALFA Optigo SFMD Скачать руководство пользователя страница 21

Страница: 21 / 24

31515694EN-02

Alfa LU-VE is a trademark registered and owned by LU-VE Group.

Alfa LU-VE reserves the right to change specifications without prior notification.

7.8 Fan replacement

Open the drip tray. Disconnect the electric supply (R). Unscrew fixing bolts and remove old fan.

Mount new fan in identical position. Use an anti-corrosion compound when remounting the fixing

bolts.

7.7 Fans

Fans should be checked 3 months after commissioning and thereafter depending on operating con-

ditions and as experience dictates, for any dirt build-up and/or unusual vibration, which could ulti-

mately cause damage to the fan or to the heat exchanger itself. Ensure complete electrical isolation

before removing fan guards. Fan blades should also be checked for any erosion or corrosion and

remedial action taken as necessary. All dirt and other contamination should be removed to avoid

imbalanced running of the fan and motor bearing overheating. The security of the fan fastenings

and the integrity of the components should be checked integrally as part of the routine maintenance

operation. Particular attention should be paid to the fastening screws and balance of the fan blades.

Содержание ALFA Optigo SFMD

























Результаты поиска

Содержание ALFA Optigo SFMD

Отзывы:

Бренды по названию

Популярные бренды

LU-VE ALFA Optigo SFMD, Оригинальное руководство пользователя

Результаты поиска

Содержание ALFA Optigo SFMD

Отзывы:

Бренды по названию

Популярные бренды