User Manual of the PTZKB835 Keyboard
16
3.2
Controlling Dome Cameras by Keyboard
Setting the Keyboard Parameters to Control Dome Camera
Before you start:
Check the connection between the keyboard and dome camera. The
TA
and
TB
interfaces of CON of keyboard should be connected to
the
RA
and
RB
interfaces of the dome camera respectively. The following figure shows the simplest way of connection between a
dome camera and keyboard.
Figure 3-5 Dome and Keyboard Connection
Steps:
1.
Turn the key to the
MENU
item, and press the
Mode
button to select
PTZ
.
Figure 3-6 Turning the Key to MENU
Figure 3-7 Choose Mode as PTZ
2.
Enter the device number. E.g. the device number is 1, press the numeric button 1 and press
SITE
button again.
Note
: The keyboard identifies the dome camera by
SITE
value, and the
SITE
value must be exactly the same with the
dome camera No..
3.
Use the joystick to set the RS485 parameters.
