LTS LTN8704-P4 Скачать руководство пользователя страница 122

Страница: 122 / 217

User Manual of 87XX-P Series NVR

122

8.6

Setting Alarm Response Actions

Purpose:

Alarm response actions will be activated when an alarm or exception occurs, including Full Screen Monitoring,

Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm Output and Send Email.

Full Screen Monitoring

When an alarm is triggered, the local monitor (VGA or HDMI monitor) display in full screen the video image from

the alarming channel configured for full screen monitoring.

If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval

of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >Configuration>Live

View>Alarm Picture Dwell Time.

Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.

Note:

You must select during “Trigger Channel” settings the channel(s) you want to make full screen monitoring.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC

installed with Remote Client.

Note:

The alarm signal will be transmitted automatically at detection mode when remote alarm host is

configured. Please refer to

Chapter Configuring Remote Alarm Host

for details of alarm host configuration.

Email Linkage

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter Steps:

Open web browser, input the IP address of device, and the web server will select the language automatically

according to the system language and maximize the web browser.

Input the correct user name and password, and click

Login

button to log in the device.

Enter the HTTPS settings interface.

Configuration > Remote Configuration > Network Settings > HTTPS

Create the self-signed certificate or authorized certificate.

Содержание LTN8704-P4


























































































































































































































Результаты поиска

Содержание LTN8704-P4

Отзывы:

LTS LTN8704-P4, Руководство пользователя, Страница: 122 / 217

Результаты поиска

Содержание LTN8704-P4

Отзывы: