![background image](http://html1.mh-extra.com/html/lts/ltn87-k-ht-series/ltn87-k-ht-series_user-manual_1945222068.webp)
Hybrid NVR User Manual
67
Chapter 5 Recording Settings
5.1 Configuring Encoding Parameters
Before you start
Step 1
Make sure that the HDD has already been installed. If not, please install a HDD and initialize
it. (Menu>HDD>General)
Figure 5-1
HDD- General
Step 2
Click
Advanced
tab to check the storage mode of the HDD. (Menu>HDD>Advanced>Storage
Mode)
1)
If the HDD mode is
Quota
, please set the maximum record capacity. For detailed
information, see
Chapter 12.4 Configuring Quota Mode
.
2)
If the HDD mode is
Group
, you should set the HDD group. For detailed information, see
Chapter 5.9 Configuring HDD Group
.
Figure 5-2
HDD- Advanced
Steps
Step 1
Enter the
Record Parameters
interface to configure the encoding parameters.
Menu>Record>Parameters