Hybrid NVR User Manual
149
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value
of the other ports should be between 1 and 65535 and the value must be different from
each other. If multiple devices are configured for the UPnP™ settings under the same router,
the value of the port No. for each device should be unique.
Figure 11-12
External Port Settings Dialog Box
2)
Click
Apply
button to save the settings.
3)
You can click
Refresh
button to get the latest status of the port mapping.
Figure 11-13
UPnP™ Settings Finished-Manual
11.2.5 Configuring More Settings
Step 1
Enter the
Network Settings
interface.
Menu > Configuration > Network
Step 2
Select the
More Settings
tab to enter the
More Settings
interface.
Figure 11-14
More Settings Interface
Step 3
Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
Alarm Host IP/Port
: With a remote alarm host configured, the device will send the alarm
event or exception message to the host when an alarm is triggered. The remote alarm
host must have the CMS (Client Management System) software installed.
