Network Video Recorder User Manual
134
Step 8
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 9
Click
Apply
.
12.7 Unattended Baggage Detection
Purpose
The Unattended Baggage Detection Function detects the objects left over in a pre-defined region
such as the baggage, purses, dangerous materials, etc., and a series of actions can be taken when
the alarm is triggered.
Step 1
Go to
System > Event > Smart Event
.
Step 2
Click
Unattended Baggage
.
Figure 12-7
Unattended Baggage Detection
Step 3
Select a
camera
to configure.
Step 4
Check
Enable Unattended Baggage Detection
.
Step 5
Optionally, check
Save VCA Picture
to save the captured unattended baggage detection pictures.
Step 6
Follow these steps to set the detection rules and detection areas.
1)
Select an
Arming Region
to configure. Up to 4 regions are selectable.
2)
Drag the sliders to set
Time Threshold
and
Sensitivity
.
Time Threshold:
The time of the objects are left in the region. If the value is 10, an alarm
is triggered after the object is left and stayed in the region for 10s. Its range is [5s-20s].