Network Video Recorder User Manual
128
Step 4
Check
Enable Face Detection
.
Step 5
Optionally, check
Save VCA Picture
to save the captured pictures of face detection.
Step 6
Drag the
Sensitivity
slider to set the detection sensitivity. Sensitivity
range: [1-5]. The higher the
value is, the more easily the face will be detected.
Step 7
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 8
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 9
Click
Apply
.
12.2 Vehicle Detection
Purpose
Vehicle Detection is available for road traffic monitoring. In Vehicle Detection, a passed vehicle can
be detected and the picture of its license plate can be captured. You can send an alarm signal to
notify the surveillance center and upload the captured picture to an FTP server.
Step 1
Go to
System > Event > Smart Event
.
Step 2
Click
Vehicle
.
Figure 12-2
Vehicle Detection
Step 3
Select a camera to configure.
Step 4
Check
Enable Vehicle Detection
.