LTS Security LTD3216C-PL, Руководство пользователя

Страница: 61 / 353

Local Configurations 51
Table 5-4
Parameter Description
System Time
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the system, and
the time in adjust automatically.
Do not change the system time randomly; otherwise the recorded video
cannot be searched. It is recommended to avoid the recoding period or
stop recording first before you change the system time.
System Zone In the System Zone list, select a time zone for the system.
Date Format In the Date Format list, select a date format for the system.
Date Separator In the Date Separator list, select a separator style for the date.
Time Format
In the Time Format list, select 12-HOUR or 24-HOUR for the time
display style.
DST Enable the Daylight Saving Time function. Click Week or click Date .
Start Time
Configure the start time and end time for the DST.
End Time
NTP Enable the NTP function to sync the Device time with the NTP server.
Server
In the Server box, enter the IP address or domain name of the
corresponding NTP server.
Click
Manual Update , the Device starts syncing with the server
immediately.
Port The system supports TCP protocol only and the default setting is 123.
Interval (Min.)
In the Interval box, enter the amount of time that you want the Device to
sync time with the NTP server. The value ranges from 0 to 65535.
5.1.4.4 Configuring Network Settings
You can configure the basic network settings such as net mode, IP version, and IP address of
the Device.
You can also configure network settings by selecting
Main Menu > NETWORK > TCP/IP .
Step 1 After you have configured the date and time settings, on the Date &Time interface,
click Next .
The NETWORK interface is displayed. See Figure 5-20.