Ltl Acorn Ltl-8830 Series, Руководство пользователя, Страница: 57 / 74

54
length of each video taken to maximize the number of animal fragments taken.
Therefore, our LTL ACORN infrared induction self timer camera can take more
2~3 times than the similar products, so that users can obtain more useful
information.
Attention: The camera performs at extreme cold environment as low as
-45°C (-49°F), in which the battery power capacity deteriorates drastically.
Therefore, the number of video clips decreases accordingly.
8.5
850nm and 940nm IR LED
Ltl-8830 series cameras has 3 types of LED light for option, 850nm, 940nm
and white light. The 850nm provides a maximum irradiation range of 25m, the
940nm provides a maximum irradiation range of 20m, and the white light
provides a maximum irradiation range of 25 m. The advantage of the 940nm
infrared LED is that it is almost invisible to the naked eye in dark
environments.
8.6
Mount on Tripod
The camera can be mounted on a 1/4" tripod. The detailed operation: align the
bolt at the top of tripod to the screw hole on the back of battery box and tighten
it, then adjust the shooting view angle of camera as request.
8.7
FAQs on 4G Function
 The camera stops sending : Please check if the SIM card
balance is enough and local signal is well.
 It takes so long to receive picture or cannot receive: The
signal is too weak or the batteries is near to be ran out.
 Set the camera to have burst shooting, but some pictures
were not sent:
The camera is able to send constantly, but if the
signal is too weak, it may not work stably.
 Receive partial image or some is incomplete: The camera
was in motion when sending pictures. Or the signal was
unstable. Besides, the SD card may be damaged.
Screw Hole on
Battery Box