Ltl Acorn Ltl-8830 Series, Руководство пользователя, Страница: 31 / 74

28
60
Get the camera to take
picture immediately
and send to your
remote control mobile,
On (1).This code is
workable in these
mode: Camera, Video,
Video + Snap.
60*1#
The camera
would take a
picture
immediately and
send to E-mail
after receiving this
SMS command.
61
This command controls
the camera to take a
video immediately (no
matter the current
mode is 'Camera',
'Video' or Video +
Snap.' mode) and send
the video to the remote
receiver E-mail.
61*1#
The camera
would take a
video immediately
and send to
E-mail after
receiving this
SMS command.
62
This command controls
the camera to start
shooting immediately,
according to the mode
set to take Camera',
'Video' or Video +
Snap, and then send, it
according to the set
sending options
(E-mail, FTP or Ltl
Camera Cloud
System).
62*1#
Camera starts
shooting(accordin
g to the mode
preset) after
receiving this
SMS
command,then
uploads according
to the send status
preset.
3.6
View Local MPNO Name and Signal Strength on TFT Screen
Camera connects with external display and power on, enters TEST preview
mode. Wait about 1 minute till you hear a short beep, then you will be able to
see the MPNO symbol and the signal strength on the LCD.