Ltl Acorn Ltl-8830 Series, Руководство пользователя, Страница: 24 / 74

21
Note: When the send status is set to Email, FTP or Ltl Camera Cloud
System, camera cannot shoot when the wireless network module is
working in ON mode, at this time if value of the "interval" or "time
lapse" is set very small, such as only a few seconds, then the actual
shooting interval will be longer than the setting, it is normal. Usually it
takes at least tens of seconds to send a video (depending on the size
of the file being sent and the network environment).
3.4
Set up Camera on PC
Visit the website of LTL ACORN directly and download the software
CameraSetup.exe.
According to the link http://www.ltlacorn.cn (Download
— >PC SETUP
Download
—
> CameraSetup.exe), download and save it on the computer,
run the CameraSetup.exe software.
Then format the SD card on the camera, eject the SD card and insert it into
the computer. If your computer cannot read SD card, you may need to
purchase an SD card reader separately.
Below is the icon of the CameraSetup.exe software:
Coordinate Confirm Input
View or manually set coordinate
longitude and latitude( make sure to
set coordinates to the camera)
Environmen
t monitoring
On/Off
When Send Options is set as Ltl
Camera Cloud System, select ON, in
the ON mode, with the correct
connection of the environmental data
acquisition device to automatically
collect environmental data
(temperature, humidity, light intensity,
etc.) and upload to cloud system).
Select OFF, cannot collect
environmental data.
Default Set
OK
Press OK key to confirm, the 4G
parameters would return to default
setting (it would not return the camera
parameters to default setting).