LTE Touchclave Ecotech 40 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 55

LTE Touchclave Ecotech 40 Скачать руководство пользователя страница 15

Touchclave Ecotech

15

Electrical Connection

Touchclave Ecotech is supplied with a 2m removable electrical power cable. The cable plugs into the
Ecotech using an IEC C19 to C20 connection and into a standard 13A electrical socket (BS1363).

Once the cable is plugged into both the Ecotech and the electrical plug, the machine can be powered
on using the power switch at the rear of the machine.

1.2 Scope of User Manual

This User Manual provides instructions for the Touchclave Ecotech autoclave manufactured by LTE

Scientific Ltd (“LTE”):

Autoclave users should be given training in the actual application environment. This manual is not
intended as a substitute for such training.

1.3 Classification of User Levels

For safety and security, users of Ecotech autoclaves are classified in four User Levels:

•

Operator

•

Supervisor (requires password)

•

Maintenance Engineer (requires password)

•

Commissioning Engineer (requires password)

The User Manual does not cover Maintenance or commissioning functions. These are explained in the
service manual.

The term “user”

used in this manual refers to either Operator or Supervisor level user.

1.4 Overview and Intended Use of Touchclave Ecotech

The Ecotech is a steam steriliser that operates by generating saturated steam in a steam generator
and subjecting the load to this saturated steam under pressure in order kill micro-organisms present
in the chamber and so sterilise the load.

«
...
13
14
15
16
17
...
»

Содержание Touchclave Ecotech 40
























































Отзывы:

Нет отзывов