© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
M201E-240-DIN_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The Control Module M201E-240-DIN serves to actuate
external devices by means of one normally open and
a separate normally closed relay contact, suitable for
switching 230VAC. Communication to the fi re detec-
tion control panel is established via the ADM loop using
System Sensor/200 protocol.
A status LED indicates the condition of the control mo-
dule.
The case is prepared for mounting on a 35mm DIN rail.
Separate terminals enable the operation of the module
with or without the integrated dual-isolator.
• ADM loop technology with
System Sensor/200 protocol
• One output with dry relay contacts
230VAC
• Status LED
• Setting of module address via
decadic rotary switches
• Prepared for mounting on a DIN rail
Specifi cations
Operating voltage
Supply through loop voltage
Current consumption
approx. 510µA (quiescent)
Contacts
1 × NO, 1 × NC
Contact rating
5A/30VDC or 5A/230VAC
Ambient temperature
-20°C to +60°C
Dimensions L × W × H
127 × 76 × 48 (mm)
Colour
cream
Weight
140g
Approval
VdS G202141
Order number
249106
Order name
Control Module 1xRel.Out-DIN/Anal./200/SS M201E-240-DIN
