LINKING
-
ONE
-
BY
-
ONE
“
One
-
by
-
one
”
linking consists in associating one child device at a time to the compatible system.
This operation is performed either through the
TauREX
software or the
FI750/RF/W2W
/
FI750/RF/CWE
keyboard
-
screen interface; it CAN-
NOT be done through
FI750/RF/WE
devices.
1)
Create the
“
virtual model
”
of the child device (be aware that the
Output Module
type has to be selected to link a remote indicator) either on
TauREX
or on the
FI750/RF/W2W
/
FI750/RF/CWE
.
2)
Trigger the linking procedure either from
TauREX
or from the
FI750/RF/W2W
/
FI750/RF/CWE
.
3)
Power
-
up the child device (either
“
first time use
”
or
“
recovery
”).
4)
Set the child device
’
s Link / program switch OPPOSITE to
“
ON
”.
5)
Wait the end of the
“
one
-
by
-
one
”
linking procedure.
6)
Check on
TauREX
or from
FI750/RF/W2W
/
FI750/RF/CWE
for linking success. Consult their user manual.
FIXING THE BACK COVER
HOW TO REMOVE AND REINSTALL THE FRONT COVER
Remote indicator
’
s installation requires the device
’
s top cover to be removed from the its bottom (see picture 3):
1) Screw the grain inwards until it stops
2) Press the tab shown in the picture and gently and carefully remove the cover
Reinstalling the cover consists in performing the operation portrayed in picture 3.
TAMPER DETECTION FEATURE
The opening of the wireless remote indicator
’
s case is signaled by the control panel as a tampering attempt; the device
’
s PCB is equipped with
a spring
-
tactile switch assembly: if the case is closed this spring is kept pressed, but when released (and this occurs if the case is opened) the
remote indicator sends a tamper attempt message to the control panel which provides the signalization of such event.
The signalization of this event is automatically revoked a short time after the case is properly closed again.
RESET
To reset the wireless remote indicator from alarm it is necessary to reset the system from the control panel: alarm indication will deactivate.
Picture 2
Picture 3
Labor Strauss
Sicherungsanlagenbau
Gmbh
-
Wiegelestrasse 36 A
-
1230 Wien Austria
www.laborstrauss.com
3
Install and fix the device
’
s rear cover in the selected position using
the screws provided in the product
’
s packaging. Fixing holes are
indicated in picture 2.
Press here
to remove
Grub screw
