LSI LSI22915A, Руководство пользователя, Страница: 26 / 50

2-8 Installing the LSI22915A
Version 1.3 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
Step 2. If you have only one internal device to connect, plug the other
end of the internal SCSI ribbon cable into the SCSI connector
on your internal SCSI device.
Figure 2.5 shows how to do this.
Note: If the internal SCSI device cannot be terminated, you must
use a cable with a built-in SCSI terminator. This connector
must be on the end of the SCSI cable.
Figure 2.5 Connecting SCSI Ribbon Cable to Internal SCSI Device
If you have more than one internal SCSI device to connect, use
an internal SCSI ribbon cable with the required number of
connectors attached along its length and continue with the next
step. If you have only one internal device, skip to
page 2-11.
Step 3. Plug the cable into each additional internal SCSI device as
shown in
Figure 2.6 .