LSI LSI22915A, Руководство пользователя, Страница: 21 / 50

Detailed Installation Procedure 2-3
Version 1.3 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
Step 13. Refer to the PCI Storage Device Management System SDMS
™
4.0 User’s Guide (or the guide for the software you use) to load
the driver software for your particular operating system.
2.2 Detailed Installation Procedure
This section provides detailed instructions for installing the LSI22915A
and connecting it to your SCSI devices. If, after reviewing this procedure,
you are not confident that you can perform the tasks as described here,
LSI Logic suggests that you get assistance.
2.2.1 Preparing for Installation
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps:
Step 1. Ground yourself before removing the host adapter board from
its package.
Caution: Static charges on your body can damage electronic
components. Handle plug-in boards by the edge; do not
touch board components or gold connector contacts.
LSI Logic recommends using a static ground strap.
Step 2. Remove the LSI22915A from the packaging and check that it is
not damaged.
Figure 2.1 shows this host adapter.
Step 3. Switch off the computer and unplug power cords for all
components in your system.
Step 4. Remove the cover from your computer per the instructions in
the user’s manual for your system to access the PCI slots.
Step 5. Locate the PCI slots in your PC.
Important: The LSI22915A requires a PCI slot that allows bus master
operation. Refer to the user’s manual for your computer to
confirm the location of the PCI slots.