LSI ITI8000 Series, Руководство пользователя, Страница: 28 / 80

1-14 Installing the ITI8000 Series CompactPCI Adapters
Rev. 1.0 Copyright © 2000–2001 by LSI Logic Corporation. All rights reserved.
ITHPS<n> The adapter is malfunctioning
ITHPS<n> The adapter is malfunctioning or is of an unknown
type
The ITHPS driver is not able to communicate with the
hardware. You may need to update your driver or your
hardware.
ITHPS<n> Failed to create minor node required for DMI interface
The ITHPS driver was unable to create an entry point for
the DMI device driver. If you are not using the DMI device
driver then you may safely ignore this message.
ITHPS<n> Could not attach to the SCSI subsystem
The ITHPS driver was unable to communicate with the
SCSI device driver that is part of the operating system.
You may need to update your driver.
ITHPS<n> Failed to allocate memory
The ITHPS driver was unable to allocate the memory
needed during initialization. You may have run out of
available memory.
ITHPS<n> Unbind failed!
The ITHPS driver had a problem when attempting to
unload itself. This is a fatal error.