Mantra Lite
Quick Start Guide
Page 8
screen above each button. You can tap the button or touch the
screen to operate them.
Touching anywhere in the top “fixtures section” of the “Home”
screen or touching
Apps
opens
the “Apps” screen. Apps are
used to control the attributes of selected fixtures. Move a
yellow fader to automatically select that fixture. Use an App to
adjust the attribute. Other methods of selecting fixtures are
described in section 9.
The
bottom section of the “Home” screen has Playback icons
showing the contents of each Playback (if any have been
recorded). Touch any playback icon to modify its memory. See
section 18
7
Controlling Fixture Intensity
The 24 (yellow) fixture faders (under the overall control of the
yellow fixture master) control the intensity of the fixtures that are
patched to them. To see the output of a fixture:
•
Fade up the Yellow Master.
•
Fade up a fixture fader to set its Intensity.
7.1
Flash
When the touch screen is on the “Home” screen, the buttons
below the yellow faders act as intensity [
FLASH
] buttons. You
can set the flash intensity level in the
Tools
/
Setup
screen.
If a red fader contains a single cue then its button acts as
intensity [
FLASH
] button.
If a red fader contains a cue-list
then its button “steps” the cue-
list. See section 17.
8
Controlling Fixture Attributes
Mantra uses “Apps” on the touch screen to control the attributes
of selected fixtures.
From the “Home” screen, open the “Apps”
page by touching anywhere in the top half of the touch screen
or touching
Apps
.
