LSC MANTRA LITE, Быстрый старт

Страница: 26 / 27

Mantra Lite Quick Start Guide
Page 26
•
Use the +10 , -10 , +1 and -1 buttons to set the DMX
address to 1 (the address of the first dimmer).
•
Fixture numbers are selected using the buttons below
the yellow fixture faders. To select all 12 dimmer
channels, hold [
1 ] and tap [ 12 ]. They light to show they
have been selected.
•
Touch Patch . Mantra takes a few moments to make
the patches and automatically increments the DMX
address for each dimmer.
To patch 12 RGB LEDs as fixtures 13 to 24
•
Under “Manufacturers” select “Generic” and under
“Models” select “LED - RGB”.
•
Use the +10 , -10 , +1 and -1 buttons to set the DMX
address to 101 (address of the first LED).
•
To select fixtures 13 to 24, hold [ 13 ] and tap [ 24 ]. They
light to show they are selected.
•
Touch Patch . Mantra takes a few moments to make
the patches and automatically increments the DMX
address for each fixture by 3.
To see the details of your patch touch View Patch .
•
To finish patching and return to the “Home” screen
double tap the [
Back ] button.
20.1 Default Show
If the patch you have created will be used on a regular basis
such as in a permanent installation, you should save it as the
"Default show".
If a “Default show” has been saved it will be
automatically loaded whenever you select a
“New” show. It
includes the patch.
21 Fixture Editor
If you have a new fixture and it is not listed in the Mantra fixture
library you can create a template for it, even if you don’t know
the functions of its DMX channels. Mantra’s Fixture Editor
allows you to use the red faders to directly control the DMX
channels of the fixture and hence discover the function of each
channel. You then select an attribute name for each channel,
then name and save the new template.