LS Mecapion L7 A001, Руководство пользователя, Страница: 36 / 222

2. Installation
2-4
2.2.2 Installation Inside the Control Panel
Comply with the spaces specified in the following images for installation inside the control
panel.
Caution

Make sure that heat does not affect the drive during the installation of external regenerative
resistance.

When assembling the control panel of the servo drive, make sure that it is sufficiently close to
the wall.

When assembling the control panel, make sure that metal powder caused by drilling does not
enter the drive.

Make sure that oil, water, and metal dust do not enter the drive through gaps or the ceiling.

Protect the control panel with air purge in places where there is a lot of harmful gas or dust.
When installing 1 unit: When installing 2 or more units:
40 mm or
longer
10 mm or
longer
10 mm or
longer
40 mm or
longer
100 mm
or longer
30 mm or
longer
30 mm or
longer
40 mm or
longer
2 mm or longer