LS ELECTRIC SV-iS7 Series, Руководство пользователя

Страница: 255 / 491

Learning Advanced Features
238
Group Code Name LCD Display Parameter Setting Unit
51
Speed controller
reference filter
ASR Ref LPF - 0 ms
52
Torque controller
output filter
Torque Out LPF - 0 ms
53
Torque limit
setting options
Torque Lmt Src 0 Keypad-1 -
54
Forward offsetting
torque limit
FWD +Trq Lmt - 180 %
55
Forward regenerative
torque limit
FWD – Trq Lmt - 180 %
56
Reverse offsetting
torque limit
REV +Trq Lmt - 180 %
57
Reverse regenerative
torque limit
REV – Trq Lmt - 180 %
58
Torque bias
setting options
Trq Bias Src 0 Keypad-1 -
59 Torque bias Torque Bias - 0.0 %
60
Torque bias
compensation
Trq BiasFF - 0.0 %
IN
65 – 75 PX terminal function setting Px Define 36 Asr Gain 2 -
65 – 75 PX terminal function setting
Px Define
37 ASR P/PI -
• For vector control mode operation, the motor-rated capacity must match the inverter ’ s rated
capacity. If the inverter capacity is too large for the installed motor, run the motor in V/F mode.
• Vector control mode does not support multiple motor control (MMC) features. Do not connect
multiple motors to one inverter that is operating in vector control mode.
Vector Control Mode – Details
Code Description
DRV-14 Motor Capacity,
BAS-11 Pole Number,
BAS-12 Rated Slip,
BAS-13 Rated Curr, Motor parameter information is required for vector control mode
operation.
Check the motor
’ s rating plate for the motor capacity and other
performance-related information, set the relevant parameters, and