LS ELECTRIC SV-iS7 Series, Руководство пользователя

Страница: 176 / 491

Basic Functions
159
B
as
ic
Func
tio
ns
7.5.3 The Terminal Block as a Command Input Device (Run and
Rotation Direction Commands)
Multi-function terminals can be selected as a command input device. This is configured by
setting DRV-
06 (command source) to “2 (Fx/Rx - 2)”. Select two terminals for run and rotation
direction commands, and then set the relevant codes (2 of the 11 multi-function terminal codes,
IN-65
– 75 for P1 – P11 [optional: P9
–
P11] ) to “1 (Fx)” and “2 (Rx)” respectively. This application uses
an Fx input as a run command, and an Rx input to change a motor’s rotation direction (On: Rx,
Off: Fx).
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV 06 Command source Cmd Source 2 Fx/Rx-2 0 – 5 -
IN
65 – 75
Px terminal
configuration
Px Define (Px:
P1
– P8
[optional: P9 –
P11])
1 Fx
- -
2 Rx
88 Delay time setting Run On Delay - 1.00
0.00
–
100.00
Sec
Run Command and Fwd/Rev Change Command Using Multi-function Terminal –
Setting Details
Code Description
DRV-06 Cmd Source Set to “2 (Fx/Rx - 2)”.
IN-65 – 75 Px Define
Assign a terminal for the run command (Fx).
Assign a terminal for changing the rotation direction (Rx).
IN-88 Run On Delay
Set the delay time if the inverter operation needs to be synchronized
with other sequences. When the run command input (Fx/Rx) is given,
the operation begins after the set time has elapsed.