LS ELECTRIC SV-iS7 Series, Руководство пользователя

Страница: 175 / 491

Basic Functions
158
7.5.2 The Terminal Block as a Command Input Device (Fwd/Rev run
commands)
Multi-function terminals can be selected as a command input device. This is configured by
setting DRV-
06 (command source) to “1 (Fx/Rx -1 )”. Select two terminals for the forward and
reverse operations, and then set the relevant codes (2 of the 11 multi-function terminal codes,
IN-65
– 75 for P1 – P8 [optional: P9
–
P11] ) to “1 (Fx)” and “2 (Rx)” respectively. This application
enables both terminals to be turned on or off at the same time, constituting a stop command
that will cause the inverter to stop operating.
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV 06 Command source Cmd Source 1 Fx/Rx-1 0 – 5 -
IN
65 – 75
Px terminal
configuration
Px Define(Px:
P1
– P8 [optional:
P9
–
P11])
1 Fx
0 – 51 -
2 Rx
88 Delay time setting Run On Delay - 1.00 0.00 – 100.00 Sec
Fwd/Rev Command by Multi-function Terminal – Setting Details
Code Description
DRV-06 Cmd Source Set to “1 (Fx/Rx - 1)”.
IN-65 – 75 Px Define
Assign a terminal for forward (Fx) operation.
Assign a terminal for reverse (Rx) operation.
IN-88 Run On Delay
Set the delay time if the inverter operation needs to be synchronized with
other sequences. When the run command input (Fx/Rx) is given, the
operation begins after the set time has elapsed.