LS ELECTRIC LSLV-H100 Series, Руководство пользователя

Страница: 314 / 618

301
Learning Advanced Features
The inverter can output a fault trip state using the multi-function output terminal (Q1) and
relay (Relay 1).
Fault Trip Output by Multi-function Output Terminal and Relay - Setting Details
5.48.3 Multi-function Output Terminal Delay Time Settings
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
OUT
30 Fault trip output mode Trip Out Mode 010 - bit
31 Multi-function relay 1 Relay 1 23 Trip - -
32 Multi-function relay 2 Relay 2 14 Run - -
33 Multi-function relay 3 Relay 3 0 none -
34 Multi-function relay 4 Relay 4 0 none -
35 Multi-function relay 5 Relay 5 0 none -
36 Multi-function output1 Q1 Define 0 none - -
53 Fault trip output on delay TripOut OnDly 0.00 0.00
–100.00
sec
54 Fault trip output off delay TripOut OffDly 0.00 0.00
–100.00
sec
Code Description
OUT-30
Trip Out Mode
Fault trip relay operates based on the fault trip output settings.
Item bit on bit off
Keypad
display
Sele
ct a fault trip output terminal/relay and select ‘29’ (Trip Mode) at codes
OUT- 31
–33. When a fault trip occurs in the inverter, the relevant terminal and
relay will operate. Depending on the fault trip type, terminal and relay operation
can be configured as shown in the table below.
Setting Function
bit3 bit2 bit1

Operates when low voltage fault trips occur

Operates when fault trips other than low voltage occur

Operates when auto restart fails (PRT-08
–09)
OUT-31
–35
Relay1
–5
Set relay output (Relay 1
–5).
OUT-36
Q1 Define Select output for multi-function output terminal (Q1). Q1 is open collector TR
output.