LS ELECTRIC LSLV-H100 Series, Руководство пользователя

Страница: 101 / 618

88
Learning Basic Features
You can set and modify a frequency reference by setting voltage inputs when using the V1
terminal. Use voltage inputs ranging from 0
–10 V (unipolar) for forward only operation. Use
voltage inputs ranging from -10 to +10 V (bipolar) for both directions, where negative
voltage inputs are used in reverse operations.
4.2.3.1 Setting a Frequency Reference for 0
–10 V Input
Set IN-
06 (V1 Polarity) to ‘0 (unipolar)’. Use a voltage output from an external source or use
the voltage output from the VR terminal to provide inputs to V1. Refer to the diagrams
below for the wiring required for each application.
[External source application] [Internal source (VR) application]
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
DRV 07
Frequency
reference source Freq Ref
Src
2 V1 0
–11
-
IN
01
Frequency at
maximum analog
input
Freq at
100% Maximum
frequency
0.00
–
Max.
Frequency Hz
05 V1 input monitor
V1
Monitor[V]
0.00 0.00
–12.00
V
06 V1 polarity options V1 Polarity 0 Unipolar 0
–1
-
07
V1 input filter time
constant
V1 Filter 10 0
–10000
msec
08
V1 minimum input
voltage
V1 volt x1 0.00 0.00
–10.00
V
09
V1 output at
minimum voltage
(%)
V1 Perc y1 0.00 0.00
–100.00
%
10
V1 maximum input
voltage
V1 Volt x2 10.00 0 .00
– 12.00
V
11
V1 output at
maximum voltage
(%)
V1 Perc y2 100.00 0
–100
%