LRX™ Rotator-II
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
3
3
DANGER
Dangerous voltages are present when power is supplied to the unit.
Disconnect all power supplies before installation or removal of unit.
Ensure all power supplies are off when connecting or disconnecting any
cabling.
Power must be removed when not in use and when data signal is removed.
Ensure unit meets all local codes prior to operation.
Safety power lockout procedures must be followed.
Safe electrical and working practices must be observed.
WARNING
This unit has rotating parts with pinch points.
Unit may move without warning.
No personal within range of motion
Never operate with any covers missing.
HANDLING & INSTALLATION OF ROTATOR
Heavy lift, the weight is approximately 621 pounds.
Handling unit creates a number of potential pinch points.
If there are any concerns regarding handling please contact your supervisor
Installation must be designed and approved to safely carry all anticipated
loads and must be mounted to a structure capable of supporting the total
load being applied.
Maximum load capacity is 5,600pounds, evenly distributed with a maximum
point load of 1,400 pounds.
It is the user’s responsibility and obligation to determine and comply with
all applicable laws and regulations.
The installation, operation and servicing of this unit to be carried out by
only authorized and qualified personnel.
If there are any concerns please contact your supervisor.
