LRX™ Rotator-II
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
2
2
WARNING
READ EQUIPMENT MANUFACTURES
MANUAL BEFORE USING THIS PRODUCT
SAFETY INSTRUCTIONS
User must be authorized, qualified and certified in jurisdiction of use.
It is the user’s responsibility and obligation to determine and comply with
all applicable laws and regulations.
Do not operate if unit or controller appears damaged.
Always use approved safety cables secured to a point capable of supporting
the total weight of the load.
Rotator weight: 621 pounds
Maximum load capacity is 5,600pounds, evenly distributed with a maximum
point load of 1,400 pounds.
Load limit is not to be exceeded.
Prior to operation a daily inspection and log are required.
In case of malfunction disconnect all power supplies, discontinue use, notify
supplier.
Area under fixture must be cordoned off at all times and kept clear of all
personnel.
Do not connect or disconnect under load.
Ensure power supply is off when connecting to controller.
Never operate with any covers removed.
No personal within range of motion of the rotator during operation.
Observe pinch points.
Safe electrical and working practices must be observed.
If using a power trolley with this fixture please refer to “LRX Power Trolley”
manual. The installation, operation and servicing of rotator to be carried
out by only authorized and qualified personnel certified in jurisdiction of
use.
Must be used with supplied KBMD DC Motor Speed Controller.
No user serviceable parts.
Unsure about anything or if you have questions, stop and contact LRX LLC
service representative before use.
For the latest version of this manual please visit “lrx-lighting.com”
