To Assemble the Table Genie
1. Remove Table Genie from packaging.
2. Contents will include:
• 1 Table Genie
• 1 Table Plate
• 1 Double-side foam tape
• 1 AA Battery
3. Pull the release tab back, then lift and remove
the battery cover.
4. Insert the AA battery.
5. Reassemble the Table Genie
To Mount the Table Genie To the Table:
1. Choose to either use Double sided Foam Tape or
3 screws to hold the Table Plate to the Table.
2. Secure Table Plate to the Table.
3. Slide the Table Genie onto the Table Plate.
Push For Service Monitor
1. Press ENTER.
2. Press EXIT.
Long Range Systems
1
Table Genie Quick Guide
Table Genie
System Interface Transmitter
QUICK SETUP & OPERATION
Release Tab of Battery Cover
Pull in Direction of Arrows
Battery
Push For Service
www.pager.net
