Protect Switch 400V motors
Version:
2.0 | 14.02.2021
instruction manual | 1145616-00000
page
18
from
28
6.3
Assembly of several modules next to each other
When assembling several module housings (MG) next to each other, minimum clearance of 30mm is
required; when assembling several module housings next to each other vertically, a minimum clearance
from the upper edge of the housing (MG3) to the lower edge of the housing (MG1) of 170 mm must be
complied with so that, first, the thermal characteristics are not affected and, second, so that the connecting
lines can be routed correctly.
MG
1
30mm
m
170mm
MG
MG
3