LPA Medical Thera-Glide oasis, Инструкция по эксплуатации

Страница: 14 / 23

14
CONTEMPORARY BACKREST
1. Pick up the cushion, head up.
Make sure the inner straps
dangle freely at the bottom of the
backrest. The end of the straps
should slightly extend beyond the
bottom of the cushion.
2. Begin slipping the bottom of the
backrest cushion over the tubular
backrest frame. Pass the straps
behind the padded part of the
top of the tubular frame, then
over the two slats of the locking
mechanism.
3. Continue to slip the cushion on the backrest
by pulling on the straps and/or the bottom
flap. Make sure to slide the locking
system activation lever through the hole
in the backrest cover. If you encounter
resistance, stop pulling; the straps may
be stuck somewhere. Remove the cushion
and start over.
4. When the cushion is fully-lowered,
run the straps under the lower slat
of the tubular backrest structure.
These instructions apply to the Contemporary backrest. If you have another
model of backrest cushion, go to the next section.