- Instruction Manual for ESS R050096 -
45
6. Packaging, transportation, storage
There are two delivery methods for the system: the entire battery system is delivered and the
battery pack is packaged and delivered separately.
◼
Delivery of the battery system as a whole
◼
The system cabinet is packed in wooden cases and the internal PE packaging bag is moisture-
proof and waterproof.
◼
EPE pearl cotton foam pad packing is used to prevent damage to the system during handling
and transportation.
◼
The battery pack is packaged and shipped separately
(1)
The system cabinet is packed in carton cases and the internal PE packaging bag is moisture-
proof and waterproof.
(2)
Each battery module is individually packaged, and the outer packaging box should be checked
that it is received intact without damage.
◼
Transportation must comply with UN3481's dangerous goods transportation and local laws and
regulations.
◼
The system is heavy and must use the mechanical handling.
◼
Transportation temperature: -10
℃
~ 40
℃
。
◼
The equipment and packaging cannot be sprayed, so it cannot be transported in the open air.
◼
Storage temperature: -20 ° C ~ 25 ° C, 12month;
-20 ° C ~ 45 ° C, 3month;
-20 ° C ~ 60 ° C, 1month;
(The SOC before storage is kept in the range of 40% to 60%)
◼
Storage humidity: 10%~80% RH.
◼
The storage room should be kept ventilated, the room should be clean and dry, and it should be
protected from dust and moisture.
◼
The storage time can be up to 6 months. It is recommended to charge and discharge the system
for more than the time.
◼
Storage room sunlight cannot be directly exposed to the system.
