L-INX/L-GATE User Manual
27
LOYTEC
LOYTEC electronics GmbH
Figure 6: Node-RED™ editor UI on the device.
The user can access data points on the device using the pre-installed ‘readDP’ and ‘writeDP’
palette items. Custom palette items can also be installed, like the ‘worldmap’. The editor UI
is also accessible on a stand-alone Web browser page under the ‘/nodered’ device URL.
Parameter and Default Values
A new
Parameter Value
property has been introduced in the data point configuration that
tracks the current parameter value on the device. This is in addition to the
Default Value
property. When uploading parameter values from the device into the configuration, the
parameter value property is updated where selected so in the parameter merge dialog. The
default value property remains unaffected by a parameter upload. This way it is possible to
track current parameter values while still keeping their original default values. When desired,
parameter values can be reset to their default values.
Figure 7: The new Parameter Value property.
New universal IN/OUT Analog/Digital L-IOB Terminal Type
With the introduction of the LIOB-110/LIOB-590 models, a new L-IOB I/O terminal
hardware type has been introduced: a universally configurable IN/OUT Analog/Digital
terminal. The signal type of this terminal determines whether it is an input (measure
resistance, current, voltage) or an output (drive 0-10V voltage output). Within its signal type
class, the known signal interpretations can be configured (e.g. PT1000, linear, translation
table).
IPv6
LOYTEC devices now support IPv6 using stateless address autoconfiguration (SLAAC) or
having a configured, fixed IPv6 address. The IPv6 feature is available on all Ethernet and
WLAN ports. With SLAAC no further configuration (except the required IPv6 router