Loyal Trade King 730, Инструкция по эксплуатации

Страница: 8 / 14

8 / 14
STABILISERS
To improve rigidity, stabilisers can be used at lower level than shown in the table on page 7 and fitted as below figure.
Assembly Procedure
Mobile Towers
ASSEMBLY AND DISMAMTLING PROCEDURES
When building a
Trade King 730
Scaffold Tower
 All platforms feature double guardrails on both faces of each platform(s).
 All guardrails should be 1 and 2 rungs (0.5m and 1.0m) above platforms.
 Never stand on an unguarded platform positioned above the first rung of a tower. If your risk assessment shows it necessary,
you may also need to guardrail platform at this level.
 Always start building with the folded base unit at the base of the tower.
TO DISMAMTLING A
Trade King 730
Scaffold Tower
 Remove toeboards, and pass down the tower.
 Unclip farthest end of braces and immediately go to protected trapdoor position to complete removal.
 Remove upper platforms from protected levels below.
 Pass removed components out of the tower to a colleague.