background image

28

In-Dash Installation

You can mount the unit in the dash with an optional FM-5 In-Dash
Adapter Kit. The kit includes mounting hardware, a template for cut-
ting the hole and an instruction sheet, part 988-0147-43.

              

In-dash mounting template for the sonar unit, showing

dimensions. NOTE: The figure above is 

not

 printed to scale. a scaled

template (FM-5 In-Dash Adapter Kit instructions) is available for free

download from our web site, www.lowrance.com.

Portable Installation

Like many Lowrance products, this sonar unit is capable of portable
operation by using the optional PPP-11 portable power pack. The power
pack and an optional portable transducer expand the uses for your so-
nar unit. The PPP-11 makes it easy to use the unit on your boat or take
it to the dock, on a float tube, on an ice fishing trip or use it as a second
sonar in a friend's boat.

The PPP-11 Portable Power Pack can be used with eight "D" cell alka-
line batteries or an optional sealed, rechargeable battery. For set-up
directions, refer to the pack's instruction sheet, part 988-0147-46.

113.5
[4.46]

Millimeters

[Inches]

ALWAYS VERIFY DIMENSIONS

In-Dash

Template

R 7.9
[0.31]

146.5
[5.76]

Top

Содержание X87





























































































Отзывы: