Lowrance HDS Gen3 Polaris Скачать руководство пользователя страница 52

Страница: 52 / 96

Video

The video function allows you to view videos or camera sources on
your system.

Note:

The video images are not shared from the Ethernet

network. You can only view the video on the unit
connected to the video source.

The Video panel

A video panel can be set up as a single panel, or as one of the
panels on a multiple panel page.
The video image is proportionally scaled to fit into the video panel.
Areas not covered by the image are colored black.

Setting up the video panel

Video source

HDS Gen3 Polaris supports one video input channel.

Video standard

HDS Gen3 Polaris supports NTSC and PAL video. Check the local
video standard or the standard of your cameras.

Adjusting the video image

You can optimize the video display by adjusting the video image
settings. Default for all settings: 50%.

Video

| HDS Gen3 Polaris Operator Manual

Содержание HDS Gen3 Polaris

































































































Результаты поиска

Содержание HDS Gen3 Polaris

Отзывы:

Lowrance HDS Gen3 Polaris, Руководство оператора, Страница: 52 / 96

Результаты поиска

Содержание HDS Gen3 Polaris

Отзывы: