
16
Device setup
EN
4.2 For operation without respiratory air
humidifier
1. To remove the humidifier if required, pull this off the
device outlet port from the front.
2. Push the breathing tube onto the click adapter for the
device outlet port.
3. Plug the click adapter of the breathing tube into the de-
vice outlet port of the therapy device. Ensure that the
locking tab is on top as you do so, and that it engages
in the groove of the device outlet port.
4.3 For operation with respiratory air
humidifier
Note
Follow the instructions for filling and adapting the SOMNO
click
300 respiratory air
humidifier in the associated instructions for use.
4.4 Breathing mask
Put on breathing mask
1. Adjust the forehead support of the breathing mask (if there is one).
2. Attach the headgear/head strap to the mask.
3. Put on the mask.
4. Adjust the headgear/head strap so that the mask cushion creates only slight pressure, so
as to avoid pressure points on the face.
Note
The rest of the process can be found in the instructions for use for the breathing
mask in question. To check that the mask is correctly positioned without leaks, you
can use the mask test (see “5.4 Mask test” on page 22).