Lowenstein Medical elisa 300, Инструкция по эксплуатации, Страница: 77 / 457

Operation | 7
Basic Instructions for Use elisa 300-500
|
SW 2.09.x
|
Rev. 11
75
7.1.1
Battery symbol
You open the “Battery” information window by tapping the symbol in the header.
For more information, please refer to chapter 7.4.2 “Battery”.
7.1.2
Patient symbol
Open the menu for input of the patient data by tapping the symbol in the header
or by selecting the “Patient” button in the button bar.
In the “Data” menu, enter the following data for the patient to be ventilated:
• Height
• Weight
• Age
• Gender
You can also access the “Patient interface” menu; see next chapter.
7.1.3
Select patient interface
By touching the “Patient interface” symbol in the header (
K
) you can open the
patient interface menu at any time and select a different patient interface. Options
that were deactivated on the configuration level are unavailable.
These are your options:
L HFOT (nasal CPAP: non-invasive)
M Mask (non-invasive)
N Endotracheal tube (invasive)
O Tracheostomy tube (invasive)
To switch between invasive and non-invasive ventilation, however, you have to en-
ter the standby mode first. First terminate the ventilation procedure by pressing
the “Ventilation” button and selecting “Stop ventilation”. Press “Enter” and then
confirm the displayed prompt. This puts the device is in standby mode and you can
choose between invasive and non-invasive ventilation.